Woodworking and Veneer Tools

	VSG-1 Veneer Species Guide This four-color publication provides detailed information and photos for the 150 wood veneer species commercially available in North America. Includes photos, specification information, physical properties, and multiple indexes designed specifically to help veneer specifers select the right species for their most challenging projects. $20.00
	PPR Pre-Catalyzed Powdered UF Resin Urea resins are a truly versatile, capable of most assembly gluing, face and edge gluing, laminating and veneering. Urea resin adhesives will produce the following glue line characteristics: Strong Rigid Thermoset Type 11 Water Resistance Excellent Heat Resistance Powdered ureas are preferred where production runs are infrequent, where ambient temperature is high and where longer storage life is needed. PPR is preformulated, complete with required fillers, additives and catalyst to meet a wide range of process requirements, such as solid wood gluing, low/moderate volume veneering and curved millwork. PPR may be hot pressed, cold pressed, or radio frequency. 5 lb. Pail-No.C3PPR-5 - $16.25 25 lb. Pail-No. C3PPR-106 - $64.50

	FSV Flexible Sheet Veneer Adhesive FSV Adhesive is a high quality synthetic Resin dispersion cold setting adhesive. It is specially formulated for use with a wide range of flexible sheet veneers. Particleboard, MDF, and other wood component cores. FSV is fast tack and quick setting where minimum pressure is required. This product is also available for use with high pressure laminates. This product is: Environmentally Friendly-No Voc. Non-Polluting Quick Tack, Fast Set Light Pink for Easy Visibility Good Gap Filling Properties Good Heat Resistance Flexible Bond 1 Gallon Jug No. C3-FSV-004 - $29.95

	Veneer Softner Relaxing Agent Custom Bond's Veneer Softener is a solution that can be used to treat crotch, burl, or wrinkled veneers to prevent splitting. This method can be used instead of the animal glue sizing procedure used in the past. Mix veneer softener with an equal amount of water before use. Full strength is not recommended as the surface will remain tacky. Apply solution to veneers by dipping, spraying or brushing. Make sure veneers are completely covered with solution. Veneers should be flexible and easily glued with no splitting. 1 Qt. Bottle-C3-VENEERS0-003 - $11.75 1 Gal. Jug.-C3-VENEERSO-004 - $32.80

	MPA Veneer Glue Wood Adhesive Moderate set speed, good heat resistance, low minimum use temperature, and long storage life. Meets ASTM D 4312-86 Type III specification. Excellent adhesive for laminating veneer, or high pressure laminates to a given substrate, as well as general assembly gluing where a heavier, filled product is desired. 1 Gal. Jug-C3-VENEER-004 - $18.95

	Veneer Tape No.VT103 - $5.50/roll For taping of veneer panels. Heavily Gummed, High Stregth, Light Weight Paper. Easily removed by sanding.

	Edgebanding Iron No. 1-EB - $32.99
	Used for applying adhesive backed edgebanding, this iron has a nonstick soleplate coating and a lacquered hardwood handle that remains cool during use. Die cast aluminum soleplate heats up to 350°F and assured even heat distribution. A stand is supplied for storage while hot iron is idle. Operates on 120V. Soleplate measures 1 3/4" wide x 4 3/4" long, handle is 6" long, cord length is 5 1/2' and overall length of iron is 12".

			Edgebanding Trimmer No. ET-100 - $11.25
			A real time saving tool, this trimmer simultaneously trims both edges of flexible edgebanding such as wood veneer, polyester and PVC materials. Has a 1/2" to 11/2" capacity with duplicate adjustable blades on both sides to trim flush, on a 45° bevel or a combination of both. To use, place the trimmer onto the edge of the panel, squeeze the tool and slide along the panel edge for a clean trim. Replacement Blades No. ET-100RP - $5.50/set of 6

	J Rollers
	No. J200B - Black - $12.50 No. J200W - White - $13.50
	For phenolic and plastic laminates. Specially designed for phenolic and plastic laminates. The handle is sturdy lightweight aluminum alloy and has two soft vinyl hand grips. 1 1/2" dia. x 3" rubber roller. Overall length is 12 1/2"

	Pressure Rollers (for heavy duty rolling of laminates) No. V300 - $17.50
	Heavy duty 1/2" ida. steel handle is specially designed and formed to provide maximum pressure. Two ribben vinyl grips provide for comfortable, sure-grip use. Attractive, rust resistant zinc plated finish. 1 1/2" dia. x 3" non-marking rubber roller. Overall length is 14 3/4"

	Squeeze Roller No.S202 For Edge Bonding Laminates Eliminate costly bonding problems in critical edge areas on phenolic and plastic laminates, countertops with this roller. Does away with clamping and pounding. It delivers, with ease, all the pressure needed for permanent adhesion. The 1-1/4" dia. polypropylene rollers will not mar the laminate. The bottom roller is 11/16" wide and the top roller is 1-7/16" wide overall length 12-3/4"
	Shpg. Wt 1LB	$15.00/Unit


	Veneer Pins No. VP130 - $12.00/100pins
	Hardened steel needles with strong plastic grips aid in jointing veneer. Quick and convenient handling without damaging the veneer. 100 pins per box.

	Veneer Saw - $9.95 Replacement Blades - $3.95
	A must for accurate veneer joints. Designed to be used with a straight edge. Its fine-toothed, double edge tool steel blade cuts a smooth accurate kerf in either direction.

	Handiwood Scraper No. HS107 - $6.50
	The 'handiwood' scraper is designed specifically for hand application of 'flexible veneer sheets' Every applicator should have one! Helps stop problems. Manufactured using the finest available materials.

	Simonds All Purpose Files No. 10-AP - $10.95 Preferred by many as these files have different cuts on each side. One side has a bastard double cut to quickly remove material. The other side has a single cut for smoother finishes. Has one safe (uncut) edge for shoulder filing and a built-in paddle handle.
	All Purpose Black Maxi-Sharp Files No. 10-AP-BM - $11.95 Specially treated with black oxide coat. These premium files last longer because they resist rust and are designed with a sharper edge.

	Squares and Straight Edges No.45-013 Folding Square - $38.95
	An indispensable tool for marking 45° and 90° angles and checking corner alignment in layout work. Has a positive spring-loaded pin that locks when the square is fully opened. Made from durable yet lightweight aluminum. Easy to fold and has a hang hole for storage. Collapsed dimensions are 4' x 21/2" and weights 4 lbs.

	Regular Plastic Laminate Shears No.11-LS - $27.00
	Capable of making straight cuts in all types of decorative plastic laminate, the 'double action', hardened steel cutting blades of this tool cut without binding, cracking or chipping the decorative surface. Tool has a 17/16" length of cut with a 9/64" kerf.

	Universal Plastic Laminate Shears No. 12-LS - $41.95
	Cuts all types of decorative plastic laminate with a hardened steel cutting blade without splitting or crazing the decorative surface. Powerful compounded leverage permits strain-free cutting without binding in the material. Has vinyl coated handles for comfort and the spring return handles can be locked in the closed position. Tool has a 9/16" length of cut with an 11/32" kerf.